Frequently Asked Questions

How to Factory Reset your Sound Bar
Last Updated 4 years ago

Find your Sound Bar model listed below and follow the instructions listed for that model.


Works with: Klipsch Icon SB 1, Klipsch HD Theater SB 3, Klipsch HD Theater SB 120, Energy Power Bar, Energy Power Bar Elite, Energy Power Bar One, Energy BTS 2.1 Soundbar, Energy Power Base, Jamo Torsten.

1. Turn the Power Bar off then, Unplug all audio cables from the Sound Bar.
2. Turn bar back on.
3. *With the LED is solid RED, press and hold the [Mute] and [Volume Down] buttons at the same time until the light flashes red several times
4. The Power Bar is now reset back to factory defaults.
5. Turn the Bar back off, hook back up the audio cable, and turn the unit back on.

*Note: 3 above …
SB-3 press and hold of the [Mute] and [Volume Up] buttons on the front panel
SB-120 press and hold of the [Source] and [Volume Down] buttons on the front panel

image


Factory Reset results: Clears all the currently learned IR codes from the Sound Bar.



Works with: Klipsch R-10B, Klipsch R-20B, and Eneregy CS-30.


1. Turn the Sound Bar off by unplug the power cable. Unplug all audio cables from the Sound Bar, then plug it back in to turn it on.
2. With the LED is solid RED, press and hold the [Mute] and [Volume Down] buttons at the same time until the light flashes red several times
3. The Power Bar is now reset back to factory defaults.
4. Turn the Bar back off, hook back up the audio cable, and turn the unit back on.

image

Factory Reset results: Clears all the currently learned IR codes from the Sound Bar.



Works with: Klipsch R-4B


1. Press and hold the [mute] and [volume] buttons at the same time until lights go out
2. The Sound Bar is now reset back to factory defaults.

image


Factory Reset results: Clears all the currently learned IR codes and clears Bluetooth pairing history from the Sound Bar.



Works with: Klipsch RSB-6, Klipsch RSB-8, Klipsch RSB-11, Klipsch RSB-14, Klipsch RSB-3, Jamo SB 40 and Jamo SB 36.

1. Press and hold the [mute] and [volume] buttons at the same time until lights go out
2. The Sound Bar is now reset back to factory defaults.

image

Factory Reset results: Clears all the currently learned IR codes and clears Bluetooth pairing history from the Sound Bar.


Please Wait!

Please wait... it will take a second!