Frequently Asked Questions
Bi-Amping allows for a speaker to be driven by two separate amplifiers, one to drive the woofers, and one to drive the tweeters. For most basic home theater setups using one receiver to drive the speakers, this is not generally recommended, nor is it necessary, just use the bottom set of binding posts. Just make sure that the connecting bridge remains in place between the two sets of binding posts and you will have no problem.
If you decide you want to bi-amp or bi-wire then you will need remove the bridges before doing this. Here are examples of how to wire using these methods.
For Bi-Amping you will need to use 2 amplifiers or your receiver will need to support Bi-Amping.